Call Us: +86-15054253857
Email:
sales@chinarubbermachine.com
Hot feed extruder
Hot feed extruder
Application:
The hot feed extruder needs to be equipped with an open mill, which is mainly used for the shaping and extrusion of various components such as treads in tire production; the shaping and extrusion of various cross-sectional products such as rubber tubes, rubber plates, and rubber sheets; wires and cables , Rubber hoses and other products are continuously covered
Machine composition:
The hot feed extruder is mainly composed of screw, barrel, feeding device, reduction gear box, mechanical (hydraulic) head, base, AC motor and electrical control system, etc.
The temperature control system can also be configured as needed, and the motor can be a DC (or frequency conversion) motor.
Model | XJ-60 | XJ-65 | XJ-85 | XJ-90 | XJ-115 | XJ-120 | XJ-150 | XJ-200 | XJ-250 | ||||
Dia of screw(mm) | 60 | 65 | 85 | 90 | 115 | 120 | 150 | 200 | 250 | ||||
L/D | 4.5:1 | 4.5:1 | 4.8:1 | 4.8:1 | 4.8:1 | 6:1 | 4.8:1 | 4.6:1 | 6:1 | 4.35:1 | 6:1 | 4.35:1 | 6:1 |
Highest speed of screw(r/min) | 75 | 75 | 65 | 65 | 60 | 60 | 55 | 45 | 45 | ||||
Motor power(KW) | 7.5 | 11 | 18.5 | 22 | 30 | 37 | 55 | 75 | 110 | ||||
Steam pressure(MPA) | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | 0.4-0.6
| 0.4-0.6
| 0.4-0.6
| 0.4-0.6
| 0.4-0.6
| ||||
Cooling water pressure(MPA) | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4 | 0.2-0.4
| 0.2-0.4
| 0.2-0.4
| 0.2-0.4
| 0.2-0.4
| ||||
Output(kg/h) | 72 | 85 | 190 | 280 | 420 | 530 | 1080 | 2400 | 3600 | ||||