kneader

Application: Used for the plastication and mixing of rubber, plastics and other raw materials

Specifications: 1.5L-200L; mechanical worm gear turning, hydraulic turning

Features: The rotor shaft of this machine adopts Taiwan technology, the spiral angle and working length of the rotor ribs are designed reasonably, which can make the material obtain the kneading effect, and it is 1-2 minutes/time faster than the ordinary kneader. The edge peaks and end faces are hardfacing wear-resistant hard alloys; rotors, ram, mixing chambers, etc. are directly plated with hard chromium (0.1mm) after being polished, which is as bright as a mirror surface and wear-resistant and corrosion-resistant. The rotor end face adopts contact external pressure type non-lubricating sealing structure, and the sealing ring is made of high-quality wear-resistant copper, which has a good sealing effect.
The junction of the upper mouth of the mixing chamber and the frame cantilever adopts a curved plate groove labyrinth pressure sealing structure, which has a good sealing and dustproof effect. The electronic control system uses world-brand electrical components, which effectively reduces the incidence of failure and has a perfect and reliable Control monitoring, alarm and other functions and necessary chain protection.

Modle/Item			X(S)N-3×32	X(S)N-5×32	X(S)N-10×32	X(S)N-20×32	X(S)N-25×32	X(S)N-35×30	X(S)N-55×30	X(S)N-75×30	X(S)N-110×30	X(S)N-150×30	X(S)N-200×30
Total volume of mixing chamber		L	8	15	25	45	55	75	125	170	250	325	440
Working volume of mixing chamber		L	3	5	10	20	25	35	55	75	110	150	200
Driving motor power		kW	5.5	11	22	37	37	55	75	110	185	220	280
Tilting motor power		kW	0.55	1.1	1.1	1.5	1．5	2.2	3	3	5.5	11	11
Tilting angle		°	140	140	140	140	140	140	140	140	140	135	135
Rotational speed of the rotor (front /rear)		r/min	32/24.5	32/23.5	32/25	32/27	32/27	34/28	34/28	34/28	30/24.5	30/24.5	30/24.5
Pressure of compressed air		MPa	0.5～0.8	0.6～0.8	0.5～0.8	0.6～0.8	0.6～0.8	0.5～0.8	0.6～0.8	0.6～0.8	0.6～0.8	0.6～0.8	0.6～0.8
Capacity of compressed air		m³/min	≥0.3	≥0.5	≥0.5	≥0.7	≥0.7	≥0.9	≥1.0	≥1.0	≥1.5	≥2.0	≥4.0
Pressure of cooling water (rubber mixing )		MPa	0.2～0.4	0.2～0.4	0.2～0.4	0.2～0.4	0.2～0.4	0.3～0.4	0.3～0.4	0.3～0.4	0.3～0.4	0.3～0.4	0.3～0.4
Pressure of heating steam (plastics mixing )		MPa	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8	0.5～0.8
Dimensions	L	㎜	2000	1850	2640	2675	2675	3200	3230	3325	4075	4250	4250
	W	㎜	1000	1200	1650	1650	1650	1900	1927	2615	2712	2750	3400
	H	㎜	2220	2580	2350	2560	2560	2950	2958	3105	3580	4106	4215
Gross weight		t	～2	～2.1	～3.3	～4	～4.5	～6.3	～7.1	～9.5	～14.5	～19.5	～22.5